Top end induction package FOR SALE. Here is a list of what’s included in the basic package, plus options below.
1. CFE/BMF 310cc CNC ported cylinder heads. Heads are fully CNC ported with a recent freshening with some upgrades from Race Flow Development (RFD). Heads have 2.300" intake and 1.88 Manley valves, Manley Nextek springs, and titanium retainers. Heads have just 25 runs since being freshened last winter. Flow numbers are just shy of 400 cfm on the intake and over 300 cfm on the exhaust. Intake runners measure 317cc, exhaust are 150cc and chambers are 116cc. I have full documentation for the heads.
2. Jesel Sportsman Series shaft rockers 1.7 ratio. Part number KSS-127070.
3. Edelbrock Victor Jr intake part number 2902. The intake has been matched to the heads and has some real nice porting in the plenum, work also done by RFD.
4. HVH Super Sucker 1" aluminum carb spacer with porting to blend the transition into the intake mounting flange. Brand new this winter.
5. ARP 12 point head bolts, part number 135-3702
6. Manton Stage 5 pushrods, 7/16" x .120 wall. Top of the line pushrods brand new this winter.
7. Bullet solid roller cam and Crower Severe Duty lifters with HIPPO oiling option. Cam specs are 269/276 @ .050, 300/310 gross, .738 intake/.710 exhaust lift, 110 lsa, 108 icl. Lifters are part number 66291H-16
8. Optional - GMPP cast aluminum racing valve covers. One hole in each for breathers, vacuum pump, fill hole location, etc.
9. Optional - Pro Systems 1000HP 4150 Holley carb. Regular drop down boosters, billet baseplate, build sheets, etc.
I have $8450.00 invested in this entire list including $1375 of work from RFD this past winter.
The basic package deal is for items 1 thru 7 which is listed for $4000.00.
The valve covers can be added for $200 and the carb for $600, but neither will be sold separately before the heads/induction package is gone.
Prices new for parts:
BMF heads $3400 complete
intake manifold $250 plus $250 in RFD porting
Jesel shaft rockers $925
HVH spacer $100
Head bolts $105
Cam $300
Lifters $550
Pushrods $320
Valve covers $320
Carb $800
All parts are currently on my running engine combination. If a buyer comes up quickly, the top end will come off to be sold right away. All parts are in excellent condition.
This induction package makes killer power for off the shelf parts on a less than max effort combination. My car weighs 3400 lbs w/driver. Engine is a super simple 461 bbc with 13.0 to 1 compression, 8" converter, th400, 12 bolt with 4.33 gears. Car has run as quick as 9.43 @ 141 mph with a 1.289 60' footbraking in good air. That calculates out to around 750 flywheel hp. Package would work great on anything from a 427 bbc up to a 540.
Any questions feel free to send e-mail to
geislert@qis.net.
Thanks for looking
Todd
