Welcome Guest, please login or register.
Pages: [1]   Go Down
  Print  
Author Topic: 434 SBC (Olds Rocket Block)  (Read 545 times)
Craig Buscio
4 cyl.
*
Offline Offline

Posts: 3


View Profile
« on: October 26, 2008, 06:38:39 PM »

434 Small Block Chevy (Olds Rocket Block)
•   Eagle 4 inch steel crank
•   Oliver rods
•   15.1 J&E pistons
•   Cam Motion 740 lift solid roller cam
•   BBC roller cam bearings
•   Raised cam Jesel belt drive
•   Moroso oil pan
•   Dart Pro 1 230 cc aluminum heads ported by Ram Racing
•   Jesel rockers (not SS)
•   Edelbrock Super Victor 4500 manifold
•   1050 Holley Dominator
•   MSD distributor with MSD wires
•   Fabricated aluminum valve covers
•   ATI balancer
•   Crower roller lifters
•   Motor ran 9.49 n/a at 140 mph. with 1.30 60ft. in a 2900 lb. car with driver
•   Motor has approximately 75 ¼ mile passes on it since built by Henry Jackson Racing Engines

Asking $7,500.  Serious inquiries ONLY!!!
Please call Craig at 732-597-1689

« Last Edit: October 26, 2008, 06:43:48 PM by Craig Buscio » Logged
Richard Maitre
Administrator
Mountain Motor
*****
Offline Offline

Posts: 4410


Race Director


View Profile WWW
« Reply #1 on: October 26, 2008, 08:25:43 PM »

guys this IS a LEGAL Drag Radial motor.

Rich
Logged
RRCPERF
Big Block
*****
Offline Offline

Posts: 267


9.81 @ 136.77


View Profile WWW
« Reply #2 on: October 27, 2008, 04:57:00 PM »

it might be drag radial legal, but it would have to weigh a lot more than 2900lbs.
Logged

HAVE TO ESPECIALLY THANK KARRIE  SHE IS THE BEST
SPECIAL THANKS DAD
THANKS KIM WAREHIME
AMI no. 4  2008 
http://www.youtube.com/watch?v=TcqI1pD9TP4
Pages: [1]   Go Up
  Print  
 
Jump to: