Welcome Guest, please login or register.
Pages: [1]   Go Down
  Print  
Author Topic: C4's, Dynamic conv, 347,306, and other ford parts  (Read 498 times)
pokadot1
Big Block
*****
Offline Offline

Posts: 347


View Profile
« on: January 22, 2009, 06:13:08 PM »

 I have a small bell, case fill, c4 with a reverse manual valve body $300.00
and a 10"? Dynamic conv. I bought conv. and valve body new with about 20 runs $350.00
Used Junk yard case fill c4  $200.00
I also have a crank rods and pistions for a 347  I got them in a trade don't know much except trick flow notches in the pistons 030 flat top I think.  $500.00 for the cast crank rods and pistons. 
306  motor, with  Eldebrock alum heads and intake? Bought as a fresh "347" found out its a 306 ran 12.0s in the mustang. should have early and fox oil pans for it and a MSD carb type dist. $1500.00
Need to sell. thanks
1 410 378 2113 home #
Logged

CHAMPION 2010 422 ALLSTARS NSS
2010 Cecil County 12.00 Champion
RAM RACING  2009 AMI RUNNER UP             CHAMPION 2008 422 ALLSTARS NSS
CHAMPION 2008 RAM RACING NA ALL MOTOR INDEX
NMCA 1993 EFI                   #1
mj79stang
V6
***
Offline Offline

Posts: 95


View Profile
« Reply #1 on: February 09, 2009, 10:45:34 PM »

 Huh? reverse manual c4 for $300 and another $350 for a converter and another v/b? is that right? so $650 for a trans, converter and an extra v/b?
Logged
pokadot1
Big Block
*****
Offline Offline

Posts: 347


View Profile
« Reply #2 on: February 10, 2009, 08:34:20 AM »

Huh? reverse manual c4 for $300 and another $350 for a converter and another v/b? is that right? so $650 for a trans, converter and an extra v/b?
Trans with maual v/b and conv. no extra v/b  $650.00 or offer but I have bells and flywheels and extra trans, come look and make a pile I think it's all cheap.
Logged

CHAMPION 2010 422 ALLSTARS NSS
2010 Cecil County 12.00 Champion
RAM RACING  2009 AMI RUNNER UP             CHAMPION 2008 422 ALLSTARS NSS
CHAMPION 2008 RAM RACING NA ALL MOTOR INDEX
NMCA 1993 EFI                   #1
mj79stang
V6
***
Offline Offline

Posts: 95


View Profile
« Reply #3 on: February 10, 2009, 06:34:01 PM »

what did the converter stall at and what motor was it behind? thanks.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to: