Cleaning up the shop,lots of intakes for sale!

[Monte Mike]

 
1
 2701 Edelbrock
 $115
 SB Chevy-1986 and earlier heads - dual plane square bore - idle to 1500
 
1
 2866 Edelbrock
 $429
 Victor SB2 Spider - square flange -requires GM lifter valley cover- 5000 to 8500
 
 2866 Edelbrock
 $451
 Victor SB2 Spider - square flange -requires GM lifter valley cover- 5000 to 8500
 
1
 2875 Edelbrock
 $407
 Victor RO-7 GM-square flange- 6000 to 9500
 
1
 2923 Edelbrock
 $340
 Victor SB2 Spider - square flange -requires GM lifter valley cover- 5000 to 8500
 
1
 2967 Edelbrock
 $275
 SB Chevy Victor Jr High Port-raised port for 23 degree heads-square flange-4000 to 8000
 
1
 2971 Edelbrock
 $242
 SB Chevy Super Victor-raised port for 23 degree heads-4500 flange-3500 to 8000
 
1
 7116 Edelbrock
 $176
 Performer RPM Vortec SB Chevy-square flange- 1500 to 6500
 
1
 7501 Edelbrock
 $198
 Performer RPM Air Gap SB Chevy 1986 and earlier heads-square flange- 1500 to 6500
 
1
 Holley 300-110
 $198
 SB Chevy Keith Dorton for 1986 and earlier heads-square flange-4500 to 8500
 
1
 2861 Edelbrock
 $396
 Victor 351Y Spider only requires valley plate for 9.2 deck and C3 (Yates) heads-square flange
 
1
 2863 Edelbrock
 $407
 Victor 351Y-for raised port C3 SVO(Yates) heads-4500 flange-5000 to 8500+
 
1
 2932 Edelbrock
 $473
 Victor SC-1 for 9.2 deck and SC-1 heads-square flange-6000 to 9000
 
1
 2929 Edelbrock
 $297
 Super Victor 351W-for 9,2 deck-square flange-4500 to 8500
 
1
 2934 Edelbrock
 $297
 Super Victor SB Ford w/8.7 deck-square flange-5000 to 9000
 
1
 7123 Edelbrock
 $561
 Performer 5.0 RPM II - 1986 to 1995 5.0L Mustang- 1500 to 6500
 
1
 Weiand 7623
 $275
 BB Chevy Team G-rectangular port-4500 flange-standard deck-2000 to 8000
 
1
 SVO M-9424-X351
 $550
 9.2 Yates 7.00/7.00 NASCAR single plane, C3/C3L 4 inch plenum depth
 
1
 SVO M-9424-A351
 $330
 9.2 Yates 6.50/6.50 NASCAR single plane, C3L flange
 
1
 SVO M-9424-D452
 $550
 SB Ford Nascar spider style w/9.2 deck-square flange-requires lifter vally tray- 4500 to 8500+
 
1
 SVO M-9424-S352
 $550
 9.500' deck height block and “Yates” heads 7.00' carburetor pad, no valley tray included
 
1
 GM 10185063
 $236
 SB Chevy-GM ZZ3 intake-spread bore or square flange
 
2
 2116 Edelbrock
 $159
 SB Chevy 1996 and later Vortec heads-dual plane spread bore or square flange-idle to 5500
 
2
 2911 Edelbrock
 $253
 Victor 454 Tall deck w/rect port heads-4500 flange-3500 to 8000
 
2
 2916 Edelbrock
 $253
 Super Victor Tall deck w/rect port heads-4500 flange-3500 to 8500
 
2
 2958 Edelbrock
 $385
 Victor 18 degree 3.2 Spider - top of 2 piece manifold-square flange-5000 to 8500
 
2
 7101 Edelbrock
 $148
 Performer RPM SB Chevy 1986 and earlier heads-square flange- 1500 to 6500
 
2
 2921 Edelbrock
 $242
 Victor Jr 302 - square flange-3500 to 8000
 
2
 2928 Edelbrock
 $297
 Super Victor for SB Ford w/8.2 deck-square flange-4500 to 9000
 
2
 7121 Edelbrock
 $192
 Performer RPM 302 Ford- dual plane-square flange-1500 to 6500
 
3
 2101 Edelbrock
 $126
 SB Chevy 1986 and earlier heads- dual plane spread bore or square flange- idle to 5500
 
3
 2862 Edelbrock
 $451
 SB Chevy SB2 Spider - square flange- 4500 to 8500
 
3
 2961 Edelbrock
 $440
 Victor 351Y Spider for 9.2 deck and C3 (Yates) heads-square flange-5500 to 9000
 
4
 2924 Edelbrock
 $275
 Super Victor 351W w/9.5 deck- square flange-4500 to 8500
 
4
 2938 Edelbrock
 $429
 Victor 351Y-2 Spider for 9.2 deck and C3 (Yates) heads-requires lifter valley cover-square flange
 
4
 GM 12480096
 $473
 SB2.2 Restrictor plate design- square flange
 
6
 2939 Edelbrock    
 $462
 Victor D-3 for Ford w/9.2 deck and D-3 head-square flange-6000 to 9500
 
 

[Richard Maitre]

Awseome selection dude.

Rich

[Monte Mike]

I have a ton of other manifolds in differant stages of porting available and any manifold on the list or not can be ported. Let me know what you need.

[Richard Maitre]

I may need to get up with you on some of this stuff to maybe have in stock or deals on something I can finish. I just do so many different types of heads that ya never know what manifold ya may need next, I could never afford to stock that variation of pieces.

Rich

[Richard Maitre]

My shit looks good, you guys' manifolds look awesome!! Maybe let me in on some top secret finishing techniques?  , LOL!!! The criss cross on the plenum floor boggles me, the only way to get it that perfect is to lay a flat template down to polish over and then switch it to other side, NO ONE has hands that good 

Rich

[Monte Mike]

 # 300-110 and # 7501 are sold!

[Monte Mike]

2- # 2924 sold!

[Monte Mike]

 # 2814, # 2828, #2940 and both # 2911 sold! Thanks guys!

[Monte Mike]

 # 7123 Pending Sale!