Wanted: 1987-2004 Mustang Coupe -- Roller, Dead, Hurt, V6, 4 cyl, etc.

[Flo Bee]

Okay fellas.  I'm looking for another car, so I figured I'd post up.

This car will be another race car.  Car needs to be a Fox/SN95 platform so anything from 1987 to 2004 would be great.  I have no preference at the moment.  It could even be a 1986 model, since there are still some parts available for those, but there are obviously more parts (body) available for the '87+ cars.

The car needs to be a coupe.  Vert will not work for this one.  T-tops will not work, either.  No sunroof.  You get the point.

Can be hatch or notch if early Fox platform car.

Engine, trans, interior not necessary.  Minor body damage on fenders, bumpers, paint not an issue.  8.8" rear would be nice, but not required.  Additional suspension mods, bars, cages, etc. will not necessarily be of any value to me as they will most likely be removed and replaced with new components of our spec.

Not looking to spend over $1200 on this thing.  $400-600 would be preferred.  I'm sure the right car is out there.  Maybe in your back yard!

Post a reply or email me at matt@matthillmotorsports.com


Thanks,
Matt

[1SlowFormula]

Matt, I saw something on the side of the road one day last week, early 80's (79-83 from the look of the nose piece) notch, if you want I can run by that one and get some details, but it is a little out of my normal commute...


BTW, the 87+ front end/front clip (fenders/bumper cover/lights/hood) can be swapped onto any of the 79+ cars without an issue, the other differences are the 1/4 windows, and if the car is going to be a full out drag car then you will probably cut the top off to build the cage in, and either when putting it back together or on it's own just have a body shop swap out the 1/4 windows on them, its pretty easy and not too expensive, the only other thing are the rear light lenses, but as you know there are so many options for those it doesn't matter and they all can swap in...