trying to make the next race in pro class BUT >>>

[tensec340]

I had to remove all wiring in car, starting from scratch......
msd 6-al
2 step 8739
rpm activation switch 8950
shift light 8932
relay 8961
car has an electic shifter soleniod
memory tach
also a trans brake

I know its alot, and I searched the msd site for diagrams, but I am very confused.
any help would be great
Tim

[Scott Rex]

MSD 6 series: http://www.msdignition.com/downld1.htm

2 step 8739: http://www.msdignition.com/pdf/8739_8737_frm22502.pdf

rpm activation switch 8950: http://www.msdignition.com/pdf/FRM23778-PN%208950.pdf

shift light: http://www.msdignition.com/pdf/8952_frm23756%20.pdf

[Richard Maitre]

you da man Scott!!

Rich

[tensec340]

Thanks Scott,
I have down loaded all those but the msd site doesn't show how to wire Together a  2 step AND rpm activation switch with a 6al box.
I am sure they must wire together ,not as seperate componets.
MSD has not resonded to me yet,hope to get this all worked out by Wensday, My new MAXIMUM engine will be going in and were trying to get to the next race.
Thanks for any help guys.
Tim

[Scott Rex]

see if this helps:

[tensec340]

Thanks,,,
Now your the MAN !!

Tim

[Maximum Race Engines]

Tim, your killing me!! :x      Think about how many times I told you I will handle the wiring as well as everything else...All the delay boxes and retards are coming out. Can't use it in Pro. We are not using the 6al or blaster coil either. Look out for a 7al2 and blaster.. The car is very old school, you really think that stuff was gonna be good for what you are doing? Lol. Don't worry we got it covered. Jees! Nothing like getting panicky and jumping the gun..and making me look bad to boot... lol. We have wired many a race cars.. :?   Take a Zanax and call me tomorrow...lol. Don't forget about Wednesday!

PS. Thanks for lookin out anyway Scott.