Michael Beach on this site?

[BENCHSEATRACIN]

Hey Rich,does a Mike Beach post on here by any chance.We bought a set of SBC Brodix aluminum heads off him years ago.He ran them on a Chevelle,a blue or green car,a 70-72 body style.The car ran very well,I believe high 8's on nitrous.He raced over at 75-80 back then.We actually met up with him there to buy the heads too.It's been quite a while back,maybe 10 years give or take a few years.Just trying to get info on the heads if he still remembers anything about them.It's been so long I can't remember all the details.My buddy Donnie bought them and the Dominator intake from him back then.Donnie dropped a valve in one of them after putting them on a motor that didn't have enough valve to piston clearance.They sat all those years till recently.Now my neighbor Brian has them,they are repaired & he's going to use them on one of his motors.They were angle milled quite a bit,and supposed to flow big numbers.
Sorry for the long thread.
Thanks,Mark Preston

benchseatracin@comcast.net

ps,Brian Hensley owns them now,if Mike reads this or hears about this,here's Brian's cell number 410-808-1827

[67410C]

Hey Mark Try street Freaks. Not sure if its the same Mike Beach but I ran with one in the MSRA dot class. I believe he runs the NIN class now at 75/80.   Mike

[BENCHSEATRACIN]

Thanks Mike! That's probably him,used to see him on the MSRA website.
How have you been?Building anything to race,or still having fun cruising your Mustang?
Thanks,Mark

[67410C]

I'm good. No not building anything as of right now, still just driving the Mustang whenever I get the chance . I'm considering doing a full restoration on it, if so I may build something to play around with while I work on the stang.