Small block Chervolet 23* top half Updated

[Maximum Race Engines]

Complete small block Chevrolet top half for sale. Everything will be sold completely reconditioned and ready to bolt on:

-AFR220 23* castings, fully ported, 3 angle valve job with custom angles, 60cc chambers, Manley 2.100" Int/ 1.600" Exh valves, 1.580" roller springs, Titanium retainers, 10* machined keepers, Viton seals, guideplates, and 7/16 studs
-ARP head studs
-Crane Gold rockers, 1.6 ratio, offset intake, center exhaust
-Comp .080" wall 3.8" pushrods, 8.050" length
-AFR stud girdles
-Cast aluminum Chevrolet valve covers
-Fully ported Bowtie intake manifold, 4150 base, comes with a 2" adapter for a 4500 series carburetor, drilled and tapped for NOS Annular fogger.
-NOS Annular fogger plumbed for above intake, with all lines and solenoids.....No purge valves, pills, main line, or bottle.
***Also available.....Wiseco custom dome pistons for above heads, gas ported, 4.155" bore, .043" top ring land, 1/16" second, 3/16" oil, .927" taper wall pin.

All parts are only a season old, off of a running engine, and will be completely reconditioned and ready to run.

Price: $4,000 everything w/o pistons
$4,500 everything w/pistons & pins

[Maximum Race Engines]

Updated.....

Complete small block Chevrolet top half for sale. Everything will be sold completely reconditioned and ready to bolt on:

-AFR220 23* castings, fully ported, 3 angle valve job with custom angles, 60cc chambers, Manley 2.100" Int/ 1.600" Exh valves, 1.580" roller springs, Titanium retainers, 10* machined keepers, Viton seals, guideplates, and 7/16 studs
-ARP head studs
-Crane Gold rockers, 1.6 ratio, offset intake, center exhaust
-Comp .080" wall 3.8" pushrods, 8.050" length
-AFR stud girdles
-Cast aluminum Chevrolet valve covers
-Fully ported Bowtie intake manifold, 4150 base, comes with a 2" adapter for a 4500 series carburetor, drilled and tapped for NOS Annular fogger.
-NOS Annular fogger plumbed for above intake, with all lines and solenoids.....No purge valves, pills, main line, or bottle.


All parts are only a season old, off of a running engine, and will be completely reconditioned and ready to run.

Price: $3,500 everything w/o Fogger
$4,000 everything w/ Fogger

Crane Gold 1.6 rockers for big block Chevrolet. Used but in excellent shape $150

MSD distributor for Ford 302 HO, Motorsports cap and rotor, used $100

Manual steering box for 70-81 Camaro/Firebird with Pitman arm $150

Pro Street small block Chevrolet balancer, NON SFI, 8" $45

ATI Super Damper, older unit but like new, just been sitting, Gold, not like the newer black ones. Big block Chevrolet, EXternal balance. $150

Brand new Holley Street Avenger, 670cfm, electric choke, vacuum secondary with fuel line. Used to start an engine, that was it. $400

Have pictures, serious inquiries only please.